Aquawhirler Inline AW-26
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: WL11828
- Founded in 2003
- Safe Shopping & Payment
- Shipping via DHL
- Hotline +49 (0) 541 50 68 195
Aquawhirler Inline AW-26
HOUSING FROM V4A STAINLESS STEEL WITH WHIRL BALLS
The new AW-26 Aquawhirler is inserted for water whirling under the sink after the water filter or even in the shower. The housing is made of high quality V4A stainless steel. The whirling happens through the newest whirling technique of Prime Inventions with the help of the Aquawhirler balls. Many small eddies originate in the water with the flow around a number of small, whirling depressions specially milled in the glass balls.
In nature, e.g. in rivers, the water also becomes turbulent by the flow around stones etc., from which a number of small vortices then also originate, which refresh the water. The AW-26 with Aquawhirler balls simulates this kind of natural whirling of the water and brings this directly into your water pipe.
- Connection ideally in the shower directly to 1/2“ wall connections (with A4 Adaptation)
- behind the water filtration systems under the sink. Adaptation depending on the system connection.
- before the washing machine
Connections: Input / output 1/2“ IG
As standard, there are two 3/8“ reduction nipples from stainless steel
A1 (inclusive): 2 pieces 1/2“ to 3/8“ reduction nipples from V4A for connection to standard reinforced tubes for connection to e.g. Carbonit® Vario or Duo.
Legth ca. 116mm
Diameter ca. 25mm
Weight ca. 290g without Adapter
NEW WHIRLING SYSTEM BY Prime Inventions WITH AQUAWHIRLER BALLS
For several years, whirling of water has been the basis of a variety of water whirling appliances. Conventional water or liquid whirler are distinguished by the fact that these consist of a housing, inside which are firmly built-in whirling units such as disks etc. In addition, water revitalization media are integrated, such as for example ceramic, quartz balls or semi-precious stones. The conventional water whirler must be mounted either on the water pipe or the water outlet on the faucet or outlet pipe.
Prime Inventions has now independently developed usable small whirling elements, the Aquawhirler balls which themselves whirl and at the same time can also be an energizing medium. A large contact area with the water is thereby guaranteed.
Due to the special formations of the whirling sites, a variety of small vortices are achieved by each Aquawhirler ball. The whirling is thereby very similar to nature, because the water also goes through many small eddies, e.g. in rivers.
Through steady, well-distributed whirling, it keeps away biofilm that cannot get attached with constant whirling. This biofilm can be a basis of bacterial growth again. The Aquawhirler balls can also be mixed to granulate materials to reach a better exploitation of the granulate material media by a uniform whirling „directly on site“ between the granulate material bodies. For example, when used together with a mineralization granulate, a more uniform and rapid absorption in the water is ensured.
You can also use the Aquawhirler balls directly inside in the aerator of a faucet, or directly in the water pipe. The advantage is a very easy installation and considerable cost savings since you do not need a special housing like with conventional water whirler. But also the simple production of a water whirler is achieved by the use of one or more whirling elements and this was realized with the Inline AW-26.