Back to Overview

Carbonit SanUno Design

Zoom

Carbonit SanUno Design

Art.No.:

Our famous water filter

from 290,00 € *

Ready for shipping

Product images

Description
Tags

The SanUno Design casing is made of high quality V4A stainless steel.

All threading parts are CNC manufactured and fit perfectly. The sealing rings accordance with the KTW or/and the FDA standard. The filter cartridge change can be made without ad ditional tools in seconds. Simply untwist the opening nut and turn the bayonet closure slightly to the right and you can lift the cap including filter cartridge filter.

The sealing is done by a specially developed screw/press technique. At the outlet is made with a stainless steel cap with thread M22x1. So water whirler can easily be attached. Recommended filter media are: NFP Carbonit Premium, Premium NFP EM X-5 or NFP Clario. The water outflow is on the highest point of the casing, therefore the problems of contamination with bacteria’s from the outflow side are reduced. The case stands on a stand with an anti-slip ring.

Specifications:

Weight: approx. 2.3 kg

Material: stainless steel (all housing parts) the valve at the faucet is chrome-plated brass
Threaded parts are manufactured CNC

Size: height without spout about 320mm, with a spout mounted approximately 460mm

Diameter at the widest point Foot: 115mm (technical data may change without notice)
A filter cartridge is not included and have to be purchased in addition, as there are many different filter cartridges for different water qualities.

Cleaning:
The surface of the SanUno Design, with its stainless steel surface, can be easily and hygienically cleaned. We recommend to use a microfiber towel and if necessary a soft detergent.

Information:
Not for use with "pressureless boilers". Only use with cold water due to the construction of the available filter cartridges.

Connection:
The SanUno Design can be connected with the diverter valve directly at the kitchen faucet (M24x1 thread necessary). If you put the diverter valve in the upright position the water flows directly through the aerator at the diverter valve (unfiltered water). If you put the diverter valve in the oblique position the water flows in the Sanuno and the filtered water comes out of the SanUno Design faucet pipe.